Your Cart
Sign In 
BEC > Product details
ZTW 12A Switch Mode Ultimate BEC/ UBEC
| Part No.: | UBEC12A |
| Manufacturer: | ZTW ESC |
Send to a friend
Features
2.The working status of UBEC is shown by an indicator (LED). When UBEC works, the blue LED lights.
3.Battery polarity reversal protection (If the connection is wrong, the UBEC can not work.)
Product Details
1. Switch Mode
2. Output: 5.0V/12A ,5.5V/12A, 6.0V/12A, 6.5V/12A, 7.0V/12A, 8.0V/12A (Output voltage is changeable by pressing Red Button circularly as requested. Note:It’s just available to continuously press Red Button over 3 seconds.)
3. Input: 7V-60V (2-14S Lipo, 6-50 NiMH/NiCd)
4. Output Current: Continuous Current 12A, Burst Current 18A
5. Size: 60.0mm*34.0mm*15.0mm(Length*Width*Height)
6. Weight:51g
How to Use the UBEC :
1.Connecting UBEC with ESC OPTO, you just parallelly connect the input connector of UBEC with the battery pack, and plug the output connector of the UBEC into one of spare channels of the receiver.
Using ESC SBEC, you must remove the red wire of the signal wires of ESC SBEC to receiver before connecting with the UBEC. (the connection with ESC SBEC is same as connection with the ESC OPTO)
Item Packing
-UBEC12A X1
Detailed Images
Recommended products list
- No Recommended products list
