> Product details
LUX 32-bit Processor Flight Controller Support PPM or Serial RX For Multirotor Racing
Part No.: | QA520 |
Manufacturer: | Feixiang |
Send to a friend
Features
LUX 32-bit Processor Flight Controller Support PPM or Serial RX For Multirotor Racing
1. Highest quality components
2. Micro USB connector for programming
3. Provides high quality flight control using the powerful F3 processor along with top of the line hardware
4. Supports PPM or Serial RX (including Futaba, FrSky, S.BUS). A signal inverter is already included for S.BUS.
Please note: KISS firmware is not supported, .
Product Details
Item name: Lux Flight Controller
PCB: Have
Weight: 6g
Output: 5v 1.0A
Input: Up to 26v (6S lipo)
RX Voltage Output Selectable: 3v/5v
Gyro/accelerometer: MPU6500 MEMS
Processor: STM32F303RCT6(256kB flash) 32-bit
Mode for bootloader + software: STM32 DFU
Dimensions: 36x36x6mm (includes USB in height)
Mounting Holes: 30.5mm square to center of holes
Pin | Function |
G | Ground |
T3/R3/R1 | UART3 TX, UART3 RX, UART1 RX |
5v | 5v Output |
CUR | Current Sensor |
BAT | Input voltage 6-26v (2-6S lipo) |
RSSI | RSSI |
LED | Digital LED Output |
PPM/SRX | Bridge PPM for PPM. SRX for SBUS, SUMD, other serial connections |
Pin | Function |
G | Ground |
2 | PWM Output (Motor 2) |
RX | RX Input (PPM,S.BUS, SUMD / 3.3-5v / GND) |
5v | Receiver Voltage (3.3v-5v) |
BZ+ | Buzzer + |
BZ- | Buzzer - |
4 | PWM Output (Motor 4) |
1 | PWM Output (Motor 1) |
T1/T2/R2 | UART1 TX, UART2 TX, UART2 RX |
5v | 5v output |
3 | PWM Output (Motor 3) |
Item Packing
2x 2x7 Straight Pin Headers
Detailed Images
Recommended products list
- No Recommended products list