Your Cart
Sign In 
Control version > Product details
KK 2.1.5 LCD Multirotor Flight Control Board KK2.1.5 Newest V1.19S1 Quadcopter
| Part No.: | KK2.1.5 |
| Manufacturer: | Feixiang |
| Quantity: | out of stock |
Send to a friend
Features
Dualcopter Tricopter Y6 Quadcopter + Quadcopter X Hexcopter + Hexcopter X Octocopter + Octocopter X X8 + X8 X H8 H6 V8 V6 Aero 1S Aileron Aero 2S Aileron Flying Wing Singlecopter 2M 2S Singlecopter 1M 4S (Custom Mix via the "Mixer Editor" option) The Mixer Editor allows you to adjust where and how much signal the motors receive from stick input and sensors. This allows you to create any configuration possible with up to 8 motors or servos.
Signal to esc: 1520us.
Signal from receiver: 1520us (5 channels).
Avr interface: standard 6 pin.
Input voltage: 4. 8-6. 0v.
Auto-level: yes.
Signal to esc: 1520us.
Signal from receiver: 1520us (5 channels).
Avr interface: standard 6 pin.
Input voltage: 4. 8-6. 0v.
Auto-level: yes.
Product Details
Size: 50.5mm x 50.5mm x 12mm
Weight: 21 gram (Inc Piezo buzzer)
IC: Atmega644
PA Gyro/Acc: 6050MPU InvenSense Inc.
Auto-level: Yes
Input Voltage: 4.8-6.0V
AVR interface: standard 6 pin.
Signal from Receiver: 1520us (5 channels)
Signal to ESC: 1520us
Firmware Version: V1.19S1 PRO or OpenAeroVTOL
S1: Pre-installed firmware.
Weight: 21 gram (Inc Piezo buzzer)
IC: Atmega644
PA Gyro/Acc: 6050MPU InvenSense Inc.
Auto-level: Yes
Input Voltage: 4.8-6.0V
AVR interface: standard 6 pin.
Signal from Receiver: 1520us (5 channels)
Signal to ESC: 1520us
Firmware Version: V1.19S1 PRO or OpenAeroVTOL
S1: Pre-installed firmware.
Item Packing
1X KK 2.1.5
Detailed Images
