Kit > Product details
HappyModel Mobula6 HDZero SuperbeeF4 Lite Built-in SPI ELRS RX EX0802 KV19000 1S 65mm HD FPV Brushless Whoop Drone
Part No.: | HM-HDZERO-ELRS |
Manufacturer: | happymodel |
Send to a friend
Features
Introducing Mobula6 HDZero, the very first 65mm HD brushless whoop in the World, weights less than 23.5 grams only!
We have been working on innovations of Brushless Whoop for a few years. Just like many of you, we are particularly eager to have a 65mm FPV whoop carrying HD VTX. Teaming with HDZero, Runcam, Nick Burns, Mr Shutterbug, Ryan Quellet and many other enthusiasts, here the dream comes true finally!
Product Details
Brand Name: Happymodel
Model: Mobula6 HDZERO
Frame wheelbase: 65mm
Weight: 23.5 gram without battery
Size: 80mm*80mm*50mm
Receiver option:
SPI ELRS 2.4GHz
SPI FRSKY 2.4GHz
Compatible with 1S Lipo battery or Lihv battery
Battery Plug: PH2.0
Flight controller SuperbeeF4 Lite FRSKY
• SPI ELRS version Firmware target: CrazybeeF4SX1280
• MCU:STM32F411CEU6 (100MHz, 512K FLASH)
• Sensor: MPU-6000 or ICM20689 or BMI270(SPI connection)
• Power supply: 1S Lipo Lihv battery input (DC 2.8V~4.35V)
• Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready
• Built-in Betaflight OSD(SPI Control)
• Built-in SPI Frsky/ExpressLRS receiver
• Built-in 5V 1A BEC
• Built-in voltage detection
Onboard 4in1 ESC
• MCU upgraded to EFM8BB21
• Power supply: 1S LiPo/LiPo HV (2.8v~4.35v)
• Currents: 5A continuous peak 6A (5 seconds)
• Support BLHeliSuite programmable
• Factory firmware: O_H_5_REV16_8.HEX
• Default protocol: DSHOT150/DSHOT300/DSHOT600
Onboard SPI ExpressLRS 2.4GHz Receiver
• Packet Rate option: 25Hz/50Hz/150Hz/250Hz/500Hz
• RF Frequency: 2.4GHz
• Antenna plug: IPEX
• Telemetry output Power: <12dBm
• Receiver protocol: SPI ExpressLRS
• Could bind with ELRS V2.0 firmware TX module
Motor
• Mode: EX0802 19000KV
• Configu-ration:9N12P
• Stator Diamter:8mm
• Stator Length:2mm
• Shaft Diameter:Φ1mm
• Motor Dimension(Dia.*Len):Φ10.5mm*14.9mm
• Weight(g):1.7g
• No.of Cells(Lipo):1S only
Propeller Gemfan 1219 Bi-blades
• Weight:0.19g
• Material: PC
• Pitch:1 inch
• Props Dia:30mm
• Center Hole Dia:1mm
HDZero Nano Lite Camera
• 14x16x11 mm
• 1.5gram
• 0.5 inch, up to 10650 mV/Lux-sec ultra-high sensitive CMos sensor
• Excellent low light performance
• Fov: 4:3: D:130° H:108° v:84°
16:9:D:122° H:108° V:65°
HDZero Whoop Lite VTX
• 1S Input
• 25mW/200mW RF Output-SmartAudio Support
• 25.5x25.5 M2 Soft Mounting- Antenna Retention
• Removable Shielding Box- 32.5x32.5mm(29x29mm inner)
• 4.5grams/4mm Thickness (without shielding)
Item Packing
SuperbeeF4 Lite FC built-in ExpressLRS SPI RX x 1
EX0802 KV19000 Unibell brushless motor x 4
Gemfan 1210 31mm propeller(4cw+4ccw) x 1
HDZero Nano Lite Camera x1
HDZero Whoop Lite VTX x1
Spare Canopy x1
Propeller disassemble tool x1
Screw driver x 1
Detailed Images
Recommended products list
- HappyModel Mobula6 HDZero SuperbeeF4 Lite Built-in SPI ELRS RX EX0802 KV19000 1S 65mm HD FPV Brushless Whoop Drone
- HappyModel Mobula6 HDZero SuperbeeF4 Lite Built-in SPI FRSKY RX EX0802 KV19000 1S 65mm HD FPV Brushless Whoop Drone
- Caddx ANT 1200TVL Global WDR OSD 1.8mm Ultra Light FPV Nano Camera 16:9 for RC FPV Tinywhoop Cinewhoop Toothpick Mobula6
- Caddx ANT 1200TVL Global WDR OSD 1.8mm Ultra Light FPV Nano Camera 4:3 for RC FPV Tinywhoop Cinewhoop Toothpick Mobula6
- Happymodel Mobula6 Crazybee F4 Lite 1S Flight Controller AIO ESC 25mW VTX Flysky AFHDS Or AFHDS-2A Switchable Receiver - Flysky
- Happymodel Mobula6 Crazybee F4 Lite 1S Flight Controller AIO ESC 25mW VTX Frsky D8 compatible Receiver for RC FPV 1S Tinywhoop Drones-Frsky
- Happymodel Mobula6 65mm Crazybee F4 Lite 1S Whoop FPV Racing Drone BNF w/ 25000KV motor FrSky Receiver version
- Happymodel Mobula6 65mm Crazybee F4 Lite 1S Whoop FPV Racing Drone BNF w/ 19000KV motor Flysky Receiver version