Your Cart
Sign In 
Accessories > Product details
RGB 5050 LED Board WS2812B for FPV RC Multicopter Compatible with Naze 32 CC3D
| Part No.: | QA390 |
| Manufacturer: | Feixiang |
Send to a friend
Features
RGB 5050 LED Board WS2812B for FPV RC Multicopter Compatible with Naze 32 CC3D
Product Details
This is the NeoPixel Stick from Adafruit, a small chainable board with eight 5050 WS2812 RGB LEDs. The WS2812s are each addressable as the driver chip is located inside the LED. Each NeoPixel Stick has ~18mA constant current drive so the color will be very consistent even if the voltage varies, and requires 5V.
Every stick is equipped with a single data line with a very timing-specific protocol requiring a real-time microconroller with a 8MHz or faster processor such as an AVR, Arduino, PIC, mbed, etc. There are solder pads on the back for connecting wires or breadboard pins and two mounting holes for securing this board to many different surfaces
Every stick is equipped with a single data line with a very timing-specific protocol requiring a real-time microconroller with a 8MHz or faster processor such as an AVR, Arduino, PIC, mbed, etc. There are solder pads on the back for connecting wires or breadboard pins and two mounting holes for securing this board to many different surfaces
Item Packing
RGB 5050 LED Board WS2812B for FPV RC Multicopter Compatible X 1
Detailed Images
Recommended products list
- No Recommended products list
