Your Cart
Sign In 
3-35V Input, 1.2-30V Output Step-down & Step-up Voltage Regulator (for FPV)
| Part No.: | FV-335AUT |
| Manufacturer: | Feixiang |
Send to a friend
Features
Typical application: Powering video TX or camera where using 12V inputs with 2-6S Lipo.
Product Details
-3-35V Input, 1.2-30V Output Step-down & Step-up Voltage Regulator (for FPV)
-Input voltage：3-35V
-Output voltage：mode 1: 1.25-30V adjustable; mode 2: fixed output (can be set to 1.25 to 30V)
-Output current：constant 1A (when output at 12V); 1.5-2A when output is set to 5V.
-Input current: 2A (MAX)
-Output power: 12W under natural cooling condition and input voltage higher than 10V, 20W with heat sink.
-Idle current: 10mA ( under 10-14V input and 12V output)
-Working temperature： -40℃ to +85℃ （output power within 10W ）
-Wrong polarity protection: No, wrong polarity will burn the PCB directly.
-Dynamic respond speed：5% 200uS
-Short circuit protection：Yes (10 seconds)
-Size: 5x2.3x1.1 cm (excluding potentiometer)
*This device is specially introduced to those experienced DIYers, basic electronic knowledge and DIY/welding skills are required, we are not responsible for damages due to lack of welding skills or wrong wirings etc.
Item Packing
-voltage regulator X 1
* Wires are not provided, customers need to weld the input and output wires yourselves, so basic welding skills are required, also wrong polarity will cause severe damage to the unit.
Detailed Images
Recommended products list
- No Recommended products list
