Categories

Payment

  • Ebay

Shipment

  • Hongkong post
  • EMS
  • FEDEX

> Product details

MATEK H743-WING V3 ArduPilot INAV 3-8S H743 Flight Controller FC 30.5X30.5mm for RC Airplane Multirotor Fixed-Wing Drones

MATEK H743-WING V3 ArduPilot INAV 3-8S H743 Flight Controller FC 30.5X30.5mm for RC Airplane Multirotor Fixed-Wing Drones
Part No.: MK-H743-V3
Manufacturer: Matek

Send to a friend

Your name:
Your e-mail:
Recipient's email:

Features

* STM32H743VIT6, 480 MHz, 2MB Flash
* ICM42688-P (SPI1) & ICM42605 (SP14)
* OSD (SPI2)
* DPS310 (I2C2)
* MicroSD BlackBox (SDI0)
* 7x UARTs, 2x I2C, 1x CAN, 1x SPI3 breakout
* 6x ADC (Vbat, Current, VB2, CU2, RSSI, Airspeed)
* 13x PWM outputs

* Switchable dual camera inputs
* Switchable 5V/9V (12V) outputs

* 8-36V DC IN (3-8S Lipo)
* High-precision current sense (90A continuous, 220A peak)
* BEC 5V 2A cont. 3A peak for FC
* BEC 9V 2A cont. 3A peak 12V option for Camera / VTX
* BEC Vx 8A cont. 10A peak for servos
       Vx = 5V Default, 6V or 7.2V option
* LD0 3.3V 200mA cont.

* * * Ardupilot MATEKH743
* * * INAV MATEKH743

Product Details

FC Specifications
 * MCU: STM32H743VIT6, 480MHz , 1MB RAM, 2MB Flash
 * IMU: MPU6000 (SPI1) & ICM42605 (SPI4)
 * Baro: Infineon DPS310 (I2C2)
 * OSD: AT7456E (SPI2)
 * Blackbox: MicroSD card slot (SDIO)
 * 7x Uarts (1,2,3,4,6,7,8) with built-in inversion.
 * 13x PWM outputs(including “LED” pad)
 * 2x I2C
 * 1x CAN
 * 6x ADC (VBAT, Current, RSSI, Analog AirSpeed, VB2, CU2)
 * 3x LEDs for FC STATUS (Blue, Red) and 3.3V indicator(Red)
 * 1x SPI3 breakout
 * USB/Beep Extender with Type-C(USB2.0)
 * Dual Camera Inputs switch
 * 5V/9V(12V) for Camera/VTX power switch
 * High-precision Current Sense (90A continuous, 220A peak)
 * Battery Voltage Sensor: 1K:10K (Scale 1100 in INAV,  BATT_VOLT_MULT 11.0 in ArduPilot)
 * ADC VB2 voltage divider: 1K:20K
 * ADC AirSpeed voltage divider: 20K:20K
 * Static power 160mA@5V
FC Firmware
 * ArduPilot(ChiBiOS): MATEKH743
 * INAV: MATEKH743
PDB
 * Input voltage range: 8~36V (3~8S LiPo) w/TVS protection
 * 2x ESC power pads
 * Current Senor: 220A,  3.3V ADC  (Scale 150 in INAV,  66.7 A/V in ArduPilot)
 * Sense resistor: 90A continuous, 220A peak.
BEC 5V output
 * Designed for Flight controller, Receiver, OSD, Camera, Buzzer, 2812 LED_Strip, Buzzer, GPS module, AirSpeed
Output 5.15  +/- 0.1V DC
 * Continuous current 2 Amps,  3A Peak
BEC 9V /12V output
 * Designed for Video Transmitter, Camera, Gimbal ect.
 * Continuous current 2 Amps,  3A Peak
 * 12V option with Jumper pad
BEC Vx output
 * Designed for Servos
 * Voltage adjustable, 5V Default, 6V or 7.2V via jumper
 * Continuous current 8 Amps,  10A Peak
BEC 3.3V output
 * Linear Regulator
 * Continuous current: 200mA
Physical
 * Mounting: 30.5 x 30.5mm, Φ4mm with Grommets Φ3mm
 * Dimensions: 54 x 36 x 13 mm
 * Weight: 30g with USB extender

Item Packing

1x H743-WING V3
1x USB(Type-C)/Beep (Passive buzzer) Extender
1x 20cm JST-SH-6P to JST-SH-6P cable for USB extender.
2x 20cm JST-GH-4P to JST-GH-4P cable for CAN & I2C port
1x Rubycon ZLH 35V 470uF capacitor
Dupont 2.54 pins  (Board is shipped unsoldered)

Detailed Images




Recommended products list