Your Cart
Sign In 
> Product details
DYS 6A Speed controller
| Part No.: | ESC-DYS6A |
| Manufacturer: |
Send to a friend
Features
-Achieve positive rotation and rollback through regulating motor wires.
-Advanced heuristic algorithm applied to meet the requirements for motors with different number of magnetic poles.
-Secure galvanization Function: Once electrified, the motor won’t be started immediately no matter where the throttle rocker on remote controller is put.
-Lost remote controlled signal protection: When the signal transmitted between emitter and receiver is bad or instable, the aero model may be out of control. The protection program will be started after 4 seconds, and make the motor slow down. If signal recovered in the 4 seconds, it will work in previous condition.
-Cooling down can be achieved by limiting the power when it’s reaching 105 ℃.If cooling down failed, the power supply will be cut off gradually. Now, -you have to wait the temperature dropping back to normal and galvanize again to have the normal service.
-Battery protection: Power supply will be cut off gradually when the electric quantity on singular battery is found less than 3.1V, When power quantity is recovered, turn off the throttle and resume it to have normal service again.
-Overload protection: Power supply will be immediately cut off when an instant high-current appears at starting. You can galvanize again to resume the normal service.
-Halted run protection: If propeller is locked, the max power output is limited at 39%.
-Advanced heuristic algorithm applied to meet the requirements for motors with different number of magnetic poles.
-Secure galvanization Function: Once electrified, the motor won’t be started immediately no matter where the throttle rocker on remote controller is put.
-Lost remote controlled signal protection: When the signal transmitted between emitter and receiver is bad or instable, the aero model may be out of control. The protection program will be started after 4 seconds, and make the motor slow down. If signal recovered in the 4 seconds, it will work in previous condition.
-Cooling down can be achieved by limiting the power when it’s reaching 105 ℃.If cooling down failed, the power supply will be cut off gradually. Now, -you have to wait the temperature dropping back to normal and galvanize again to have the normal service.
-Battery protection: Power supply will be cut off gradually when the electric quantity on singular battery is found less than 3.1V, When power quantity is recovered, turn off the throttle and resume it to have normal service again.
-Overload protection: Power supply will be immediately cut off when an instant high-current appears at starting. You can galvanize again to resume the normal service.
-Halted run protection: If propeller is locked, the max power output is limited at 39%.
Product Details
-Continuous current:7A
-Pepersistent current:9A
-Compliant with Lithium Battery: 2
-compliant with Ni-Mh battery: Yes
Instruction-Throttle settings
Follow the next guide to deploy the max and min settings of throttle, when you first use or change emitter/ receiver.The following steps tell you how to make the max and min throttle settings
Put the throttle on the highest position, galvanization, keeping it for10 seconds, a long beep comes to record the max throttle settings.
Put the throttle on the lowest position, keeping it for 3 seconds, a long beep comes to record the min throttle settings.
Seriate beeps come to indicate normal operations are available.
Item Packing
-DYS 6A Speed controller X 1
Detailed Images
Recommended products list
- DYS 5.8G 5DBI Omni Mushroom Antennas SMA-Niddle for DIY FPV Drone RED SAM PLUG
- DYS Mars 2306 2750KV CCW/CW 3-6S Racing Brushless Motor for FPV Racing
- DYS Mars 2306 2400KV CCW 3-6S Racing Brushless Motor for FPV Racing
- DYS MR Series MR2205 2300KV Brushless Motor CCW For FPV Mini Quad Racer
- DYS SE2205 PRO 2550KV 3-5S Lipo Race Edition Motor CCW for 180 210 220 FPV Racer
- DYS BE1102 7800KV Brushless Motor for FPV Racing
- DYS 10A 2-4S Speed Controller (Simonk Firmware) for Multicopter | V2
- DYS 6A Speed controller
