Categories

Payment

  • Ebay

Shipment

  • Hongkong post
  • EMS
  • FEDEX

> Product details

Matek MATEKSYS F405-WTE F405 STM32F405RET6 Flight Controller Built-in OSD SD Slot DPS310 for RC Drone

Matek MATEKSYS F405-WTE F405 STM32F405RET6 Flight Controller Built-in OSD SD Slot DPS310 for RC Drone
Part No.: F405-WTE
Manufacturer: Matek

Send to a friend

Your name:
Your e-mail:
Recipient's email:

Features

Matek MATEKSYS F405-WTE F405 STM32F405RET6 Flight Controller Built-in OSD SD Slot DPS310 for RC Drone

Product Details

FC Specifications
- MCU: STM32F405RGT6, 168MHz , 1MB Flash
- IMU: ICM42688-P
- Baro: SPL06-001
- OSD: AT7456E
- Blackbox: MicroSD card slot
- ESP WiFi Telemetry(MAVLink, 14dBm)
- ExpressLRS 2.4G receiver(CRSF protocol, Telemetry 12dBm)
- 6x UARTs,  1x Softserial_Tx option(INAV)
- 12x PWM outputs
- 1x I2C
- 4x ADC (VBAT, Current, RSSI, Airspeed)
- USB/Beep Extender with Type-C(USB2.0)
- Dual Camera Inputs switch
- 9V(12V) for VTX power switch

FC Firmware
- ArduPilot: MatekF405-TE
- INAV: MATEKF405TE_SD (not available in INAV configurator 4.x)

PDB
- Input voltage range: 6.8~30V (2~6S LiPo)
- 1x ESC power pads
- Battery Voltage divider 1K:20K (Scale 2100 in INAV,  BATT_VOLT_MULT 21.0 in ArduPilot)
- Current Senor: 220A,  3.3V ADC  (Scale 150 in INAV,  66.7 A/V in ArduPilot)
- Sense resistor: 90A continuous, 220A peak

BEC 5V output
- Designed for Flight controller, Receiver, OSD, Camera, Buzzer, 2812 - - LED_Strip, Buzzer, GPS module, AirSpeed
- Continuous current: 2 Amps, Max.3A

BEC 9V /12V output
- Designed for Video Transmitter, Camera, Gimbal ect.
- Continuous current: 2 Amps, Max.3A
- 12V option with Jumper pad
- for stable 9V/12V output, input voltage should > output voltage +1V

BEC Vx output
- Designed for Servos
- Voltage adjustable, 5V Default, 6V or 7.2V via jumper
- Continuous current: 8 Amps, Max.10A
- for stable Vx output, input voltage should > Vx voltage +1V

BEC 3.3V output
- Designed for Baro / Compass module and external 3.3V peripherals
Linear Regulator
- Continuous current: 200mA

Physical
- Mounting: 25 x 25mm, Φ2mm
- Dimensions: 44 x 29 x 12.7mm
- Weight: 22g  w/ USB/buzzer adapter

Item Packing

1x F405-WTE
1x USB(Type-C)/Beep (Passive buzzer) Extender + 20cm JST-SH-6P to JST-SH-6P cable for USB extender.
2x IPEX-MHF1 2.4G Antennas
1x Rubycon ZLH 35V 470uF capacitor
Dupont 2.54 pins  (Board is shipped unsoldered)

Detailed Images