Payment

Shipment

Your Cart

Your cart is empty

Manufacturer


日本語
한국어
Español
Français
Русский
繁體中文

If your order ship by Hong Kong Air Mail, You can check it on

If your order ship by EMS, You can check it on

> Product details

EFT Step-Down Module / Water Pump Power Supply 24V to 12V 6A For Agriculture Plant protection Drone UAV

Part No.:	EFT-24V-12V
Manufacturer:	EFT

Send to a friend

Features

1. It is made of imported integrated switching regulator module, all imported components from famous factories, stable and reliable quality
2. Synchronous rectification technology, the conversion rate is over 96%, and the heat generation is extremely low
3. It has automatic protection functions such as overcurrent and short circuit, and can work normally after the conditions are restored.
4. Using epoxy resin potting, it is shockproof, waterproof, moisture-proof, dust-proof, flame-retardant, and the quality is stable and reliable for long-term use!
5. Ultra-thin, small size, high efficiency and easy to install and use!

Product Details

Product name: 24V to 12V step-down module
Wiring mode: red wire—input positive; yellow wire—output positive; black wire—common negative
Volume: 47mm*34mm*22mm
Weight: about 70g
Parameter description: Module nature: non-isolated step-down module (BUCK)
Rectification method: synchronous rectification
Minimum pressure difference: 5V
Conversion efficiency: up to 96%
Output ripple: 50mV (MAX)
Working temperature: industrial grade (-20°C to +85°C) (the ambient temperature exceeds 40°C, please reduce the power to use, or strengthen the heat dissipation)
Load regulation rate: ±1%
Voltage adjustment rate: ±2%
Short-circuit protection: sustainable and self-healing.
Input reverse connection protection: None, if necessary, please connect a diode in series with the input

Precautions:
1. Please strictly follow the wiring rules for wiring, and the positive and negative voltages must not be reversed, otherwise the power supply module may be damaged, and the reverse connection of the output voltage may damage electrical equipment.
2. In order to ensure that the module can output enough voltage and power, please ensure that the input power supply has enough voltage and power.
3. If there are multiple output lines at the output end, please carry the load evenly, please combine the loads in a hurry.
4. If the output reaches the maximum current value, pay attention to the heat dissipation of the power module (it is better to leave a certain current margin for the module, so that the service life is longer, and the maximum value should not be used as much as possible)
More about this source textSource text required for additional translation information.

Item Packing

EFT Step-Down Module x 1