Your Cart
Sign In 
Rcexl Ignition Tachometer for Petroal/Gas Engine V2.0 CDITMT
| Part No.: | EG-CDITMT |
| Manufacturer: |
Send to a friend
Features
-Rcexl Ignition Tachometer for Petroal/Gas Engine V2.0 CDITMT
Product Details
-Use PIC16f628a microcontrollers
-Do not need batteries,Power from the ignition
-Standard FUTABA plug(Black-Negative Red-Positive and White-Signal)
-Using high-brightness LED digital tube.
-Input voltage range:3.0V-12V
-Current consumption 25mA-60mA
-Mini tachometer indicates up to 30000 rpm
-Actual RPM= Display Digital *10
-Body Size: 54mm L x 20mm W x 16mm H
-Window Size: 30mm L x 15mm H
-Weight:15g (0.5OZ)
-Do not need batteries,Power from the ignition
-Standard FUTABA plug(Black-Negative Red-Positive and White-Signal)
-Using high-brightness LED digital tube.
-Input voltage range:3.0V-12V
-Current consumption 25mA-60mA
-Mini tachometer indicates up to 30000 rpm
-Actual RPM= Display Digital *10
-Body Size: 54mm L x 20mm W x 16mm H
-Window Size: 30mm L x 15mm H
-Weight:15g (0.5OZ)
Item Packing
Instructions:
-The Y wiring tandem between in the HALL sensor and the ignition.
-The tachometer plug the other end with Y wire.
-Connected to ignition power supply and can be displayed
Note:
That connecting plugs do Reinforcement. To prevent vibration.
The hall sensor & tachometer wire Leave from the Ignition high-voltage wire,
And receiver wires over 30cm
Connection tachometer is not recommended after the use of flight,
Best to remove the Y wire to restore the original sensor connection
If ignition have an additional tachometer pinout.
You must be connected to dedicated tachometer signal wire.
-The Y wiring tandem between in the HALL sensor and the ignition.
-The tachometer plug the other end with Y wire.
-Connected to ignition power supply and can be displayed
Note:
That connecting plugs do Reinforcement. To prevent vibration.
The hall sensor & tachometer wire Leave from the Ignition high-voltage wire,
And receiver wires over 30cm
Connection tachometer is not recommended after the use of flight,
Best to remove the Y wire to restore the original sensor connection
If ignition have an additional tachometer pinout.
You must be connected to dedicated tachometer signal wire.
Detailed Images
