Your Cart
Sign In 
JMT 4 IN 1 Crazybee F3 Flight Controller OSD Current Meter 5A 1S Blheli_S ESC Compatible Flysky Receiver for Whoop Drone
| Part No.: | CrazybeeF3-Flysky |
| Manufacturer: | Feixiang |
Send to a friend
Features
Product Details
Firmware: Betaflight_3.3.0_Crazybee
MCU: STM32F303CCT6 (72MHZ, 256K FLASH)
Sensor: MPU-6000(SPI connection)
Power supply: 1S battery input (DC 3.5-4.35V)
Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready
Frsky version Built-in SPI control Frsky receiver with telemetry(D8/D16 switchable)
Flysky version Built-in SPI control Flysky receiver with telemetry(AFHDS/AFHDS-2A switchable)
DSM2/X version Built-in Serial-based Spektrum compatible DSM2/DSMX satellite receiver
Built-in Betaflight OSD(SPI Controll)
Built-in Current meter (Max 14A,could be modified to 28A by replace resistor)
Built-in 5V 0.8A BEC with LC filter
Built-in voltage detection
BLHELI_S pass-through Ready
Heading LED Ready
Board size: 28.5 * 28.5MM
Board weight: 3.5 g
ESC parameters:
Power supply: 1S LiPo/LiPo HV (4.2v/4.35v)
Current: 5A continuous peak 6A (3 seconds)
Support BLHeliSuite programmable
Factory firmware: O_L_5_REV16_6.HEX
Signal Support: Dshot150/Dshot300/Dshot600/Oneshot125/Multishot/PWM
Item Packing
Battery Connector x 3
Motor connector cables (Must be soldered onto your motor wires) x 4
Mounting accessories kit x 1
Detailed Images
Recommended products list
- JMT 4 IN 1 Crazybee F3 Flight Controller OSD Current Meter 5A 1S Blheli_S ESC Compatible Flysky Receiver for Whoop Drone
- Crazybee F3 Flight Controller OSD Current Meter 4 IN 1 5A 1S Blheli_S ESC Compatible Flysky Receiver for Helicopter
- Super_s F3 Flight Controller Board Integrated OSD Brushless 5V BEC _S for FPV Quadcopter
- PIKO BLX Advanced brushlessed mini quadcopter F3 Flight Controller Racewhoop-V1 16*16MM
- SP Racing F3 Flight Controller With Integrated OSD Deluxe for FPV Multicopter
- NEW MINI MICRO SP Racing F3 Flight Controller
- SP Racing 10DOF F3 Flight Controller with M8N GPS OSD COMBO
