Your Cart
Sign In 
Happymodel Moblite7 1S 75mm Ultra Light Brushless Tiny Whoop Assembled For Flysky Receiver Diamond F4 Flight Controller
| Part No.: | FLY-Moblite7 |
| Manufacturer: | happymodel |
| Quantity: | out of stock |
Send to a friend
Features
Powerful and efficiency
The lightest 1s AIO 5IN1 F4 flight controller
New Unibell EX0802 brushless motors
Low profile Canopy design
VTX power switchable 25mw~200mw
Product Details
Motor:
- Mode: EX0802 19000KV
- Configuration: 9N12P
- Stator Diameter: 8mm
- Stator Length: 2mm
- Shaft Diameter: Diameter 1mm
- Motor Dimension (Dia.*Len): Diameter 10.5mm*14.9mm
- Weight(g): 1.7g
Flight Controller:
- (For Flysky SPI RX version) DiamondF4 FR FC Firmware target: CrazybeeF4FR
- MCU: STM32F411CEU6 (100MHZ, 512K FLASH)
- Sensor: MPU-6000 (SPI connection)
- Original whoop size compatible
- For Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready
- For Built-in Betaflight OSD (SPI Control)
- Built-in 5.8G VTX
- For Built-in SPI Frsky/Flysky receiver
- Built-in 5V 1A BEC
Onboard 4in1 ESC:
- MCU upgraded to EFM8BB21
- Power supply: 1S LiPo/LiPo HV
- Current: 5A continuous peak 6A (3 seconds)
- Support for BLHeliSuite programmable
- Factory firmware: O_H_50_REV16_8.HEX
- Default protocol: DSHOT600
Onboard 5.8g VTX:
- Output power: 25mw~200mw switchable
- Frequency: 40CH
- Input voltage: 3.3V 5.5V
- Current consumption: 300mA (type)
- Frequency: 5.8GHz 5bands 40 channels (include Race band)
- Smartaudio ready
Runcam Nano4 Lite:
- Model: RunCam Nano4 Lite
- Image Sensor: For 1/3" CMOS
- Horizontal Resolution: 800TVL
- Lens: 2.1mm (M8) FOV 160°
- Signal System: PAL/NTSC Non-Switchable
- S/N Ratio: >50dB
- Electronic Shutter Speed: Automatic
- Automatic Gain Control (AGC): Automatic
- Min. Illumination: 0.01Lux at 1.2F
- D-WDR: Auto
- Day/Night: Color
- Power: DC 3-5.5V
- Current: 170mA at 5V; 180mA at 3.3V
- Housing Material: ABS
- Net Weight: 1.0g
- Dimensions: L14mm*W12mm*H9mm
Item Packing
DiamondF4 FS built-in SPI Flysky receiver x 1
EX0802 KV19000 Unibell brushless motor x 4
HQPROP 40MMX2 propeller(4cw+4ccw) x 1
Runcam Nano4 Lite x 1
Built-in 5.8G 40ch 25mw-200mw VTX x 1
1s 650mah Lipo battery x 2
Propeller disassemble tool x 1
Screwdriver x 1
Happymodel Carry case x 1
Detailed Images
