Categories

Payment

  • Ebay

Shipment

  • Hongkong post
  • EMS
  • FEDEX

> Product details

iFlight SucceX-D Mini F7 TwinG Stack (F7+40A ESC) for DJI Air Unit FPV Racing

iFlight SucceX-D Mini F7 TwinG Stack (F7+40A ESC) for DJI Air Unit FPV Racing
Part No.: IF-F7-40A
Manufacturer: IFlight
Quantity:out of stock

Send to a friend

Your name:
Your e-mail:
Recipient's email:

Features

• Universal USB Type C connector instead of micro USB
• Plug-and-Play. No need to solder tiny wires.)
• Supports BLHeli pass-through for easy ESC upgrade and configuration.
• Designed to support DJI Digital FPV.

NOTE:
If you use your own DJI Remote Controller, you MUST update your firmware betaflight_4.1.0_STM32F7X2  configurator betaflight to 10.6.0 to set up and bind your DJI remote controller.

Model 1 setup: Reveiver tap -----> Choose “Spektrum / Graupner / JR (TAER1234)”
Model 2 setup: Reveiver tap -----> Choose “Frsky / Futaba / Hitec (AETR1234)”

Product Details

SucceX-D F7 TwinG  SPECS:
-MCU: 216MHz STM32F722
-Gyro: TwinG ICM20689
-Blackbox: 32MB
-Betaflight OSD: YES
-BEC: 5V 2.5A
-9V 2.5A 18W Design for DJI FPV Air Unit
-Uarts: 5
-ESC Telemetry: UART5
-INA Pad:nuart2
-Input voltage: 2-6S,MAX 8S
-Firmware: betaflight_4.0.5_STM32F7X2.hex
-CLI dump file: IFLIGHTF7_TWIN_G.config
Size:27*27mm /20*20mm φ3 mounting
Physical:
- Mounting hole: 20*20mm, φ4mm with Grommets φ3mm
-Size: 31*31mm

SucceX Mini 40A ESC SPECS:
- MCU: STM32F051K66
- Current Sensor: Yes
- Input: 2-6S lipo
- Telemetry: Yes
- Installing Hole: 20x20mm, M3
- Target: iFlight-BL32-4IN1
- BLHeliSuite download
- Constant: 40Amps
- Burst: 45Amps
- Weight:16.7g
- Dimensions: 31*31mm(including the power pads)
- Mounting Holes: 20*20mm,M3
- Supports Dshot1200,Proshot,Oneshot,Multishot

Item Packing

-SucceX-D Mini F7 TwinG FC x 1
-SucceX 40A BLHeli_32 4-in-1 ESC x 1
-DJI compatible harness cable x 1
-Stack mounting screws and dumpers and nuts,cable

NOTE:The stack is not included DJI Air Unit

Detailed Images