Payment

Shipment

Your Cart

Your cart is empty

Manufacturer


日本語
한국어
Español
Français
Русский
繁體中文

If your order ship by Hong Kong Air Mail, You can check it on

If your order ship by EMS, You can check it on

HENGE 4A UBEC Input 7V-25.5V 2-6S Lipo Output 5V 6V/4A Continuous Max 6A for RC Quadcopter Airplanes Car Parts

Part No.:	HG-4AUBEC
Manufacturer:	Feixiang

Send to a friend

Features

5V/6V output switchable!
Power polarity misconnected protection
LED working status indicator!
A ferrite ring is attached with the output wires to significantly reduce electromagnetic interference!
4A UBEC is an external voltage stabilizer，it works at the Switch Mode 。It can obtain the suitable DC voltage from 7-25.5V input voltage for receivers and other devices, and steadily provide 6A current to supply power for receiver, gyro, and multi servos. Therefore, the 6A UBEC is very suitable for large electric fixed wing aircraft and helicopters which uses 4S or more batteries. With this UBEC, you can obtain the power for receivers from dynamic power without equipping independent battery pack for receivers.

Features
-- Designed with an advanced switch mode DC-DC regulator IC, the max efficiency of the chip is up to 93% ；
-- The small size and the light weight make it very convenient to use；
-- The output current is very large, the continuous output current is up to 4A, and the burst output current is 6A.；
-- A shield covers almost all the electronic components on PCB, and a special made filter(ferrite ring) is attached with the output wires to significantly reduce the electromagnetic interference；
-- With ultra-wide input voltage from 7V—25.5V；
-- Safe power on with the polarity protection function. If the input polarity is not correct ,the UBEC can’t work, but it will not be damaged. What you need to do is just swapping the battery pack’s polarity ；
-- Shows the working status with an indicator(LED), lights when the output is in normal range.

Product Details

Output voltage：5V/4A or 6V/4A（changeable with a jumper），Maximum output current：6A（≤15S）
Input：7-25.5V (2 to 6 cells Lipo battery pack, 6 to 16 cells NIMH battery pack)
Ripple：<45mVp-p（@2A/12V）
Size：39mm*21mm*6mm (L*W*H)
Weight：14g（incluing the cable and the ferrite ring)

Item Packing

HENGE 4A UBEC x 1