Your Cart
Sign In 
iFlight ipower GM6208 brushless gimbal motor with AS5048A, applicable to single-lens reflex (SLR) gimbal aerial photography.
| Part No.: | GM6208 |
| Manufacturer: | IFlight |
Send to a friend
Features
The GM62 series motor by iPower Motors is the ultimate brushless gimbal motor for DSLR / CANON 5D MARKII, MARKIII Cameras. This motor is designed for large scale multi-rotor platforms looking to lift Red Epic & DSLR sized gear – 4KG/cm Torque.
Product Details
Model: GM6208
Motor Out Diameter: Ф69.5±0.05mm
Configuration: 24N/28P
Motor Height: 32±0.2mm (Included with Encoder housing)
Hollow Shaft(OD): Ф25-0.01/-0.015 mm
Hollow Shaft(ID): Ф22+0.05/+0 mm
Wire Length: 610±3mm
Cable AWG: #24
Motor Weight: 265±0.5g
Wire plug: 2.5mm dupont connector
No-load current: 0.08±0.1 A
No-load volts: 20 V
No-load Rpm: 209~231 RPM
Load current: 1.2A
Load volts: 20V
Load torque(g·cm): 2600-3600
Motor internal resistance: 32Ω±5%（Resistance varies with temperature）
High voltage test: DC500V 1mA @2sec
Rotor housing runout: ≤0.1mm
Steering (axle extension): clockwise
High-low temperature test:
High temperature: Keep at 60℃ for 100 hours, and the motor can work normally after 24 hours at room temperature
Low temperature: Keep at -20℃ for 100 hours, and the motor can work normally after 24 hours at room temperature
Maximum power: ≤25W
Working current: 3-5S
Working temperature: -20~60℃;10~90%RH
Motor Out Diameter: Ф69.5±0.05mm
Configuration: 24N/28P
Motor Height: 32±0.2mm (Included with Encoder housing)
Hollow Shaft(OD): Ф25-0.01/-0.015 mm
Hollow Shaft(ID): Ф22+0.05/+0 mm
Wire Length: 610±3mm
Cable AWG: #24
Motor Weight: 265±0.5g
Wire plug: 2.5mm dupont connector
No-load current: 0.08±0.1 A
No-load volts: 20 V
No-load Rpm: 209~231 RPM
Load current: 1.2A
Load volts: 20V
Load torque(g·cm): 2600-3600
Motor internal resistance: 32Ω±5%（Resistance varies with temperature）
High voltage test: DC500V 1mA @2sec
Rotor housing runout: ≤0.1mm
Steering (axle extension): clockwise
High-low temperature test:
High temperature: Keep at 60℃ for 100 hours, and the motor can work normally after 24 hours at room temperature
Low temperature: Keep at -20℃ for 100 hours, and the motor can work normally after 24 hours at room temperature
Maximum power: ≤25W
Working current: 3-5S
Working temperature: -20~60℃;10~90%RH
Item Packing
1 x GM6208 150T Brushless Gimbal Motor
1 x AS5048A Encoder with aluminum case
1 x AS5048A Encoder with aluminum case
Detailed Images
Recommended products list
- iFlight ipower GM6208 brushless gimbal motor with AS5048A, applicable to single-lens reflex (SLR) gimbal aerial photography.
- iFlight Gimbal Motor GM110-10 drone pod Motor/Turntable of Airborne Lid ar Pod Motor W/ AS5048A Encoder
- iFlight iPower Gimbal Motor GM110-8 UAV pod motor Turntable Airborne Lidar Pod motor with AS5048A Encoder
- iFlight IPower GM2804 Brushless Gimbal Motor with AS5048A Encoder for Camera Stabilizing Systems
- IFlight IPower GM4108 with AS5048 AEncoder Brushless Gimbal Motor for Applicable Camera Stabilization 600-1200g 5N/7N/GH2
- iPower Motor GM3506 Hollow shaft Brushless Gimbal Motor w/ AS5048A Encoder For SLR Camera Stabilization
- IFlight IPower Motor GM3506 hollow shaft Brushless Gimbal Motor for SLR Camera Stabilization Instead GBM3506-130T
- iPower Motor GBM8017-120T SC Brushless Gimbal Motor
- iPower Motor GBM6212H-150T Brushless Gimbal Motor
