STM32 F745 MCU – faster than the current F3 and F4 processors
Two gyros on the flight controller: an MPU6000 for sampling up to 8khz and ICM20608 for sampling up to 32khz
Built in betaflight OSD
Built in Current sensor
Built in 5V LC-power filter
Built in Barometer
D-shot esc Support（Dshot600 Ready）
36x36mm, mount holes 30.5×30.5mm
Weight: 6.6g
SD card reader for recording black box data (SD card not included)
Supports 2-4s natively, 5-6s with 220uf 35V capacitor
5v/1A regulator
Support PPM/SBUS/IBUS/DSM2/DSMX protocol receiver
LED_strip ready pin headers
Buzzer ready pin headers
Smart port ready Pin headers
Compatible 4 in 1 ESC with JST-SH 1.0 6pin housing
Firmware version: Betaflight 3.2.0 Omni F7