Feetech FU8830BL 7.4V 30kg 180 Degree CAN Bus Titanium Gear Metal Brushless Servo












Feetech FU8830BL 7.4V 30kg 180 Degree CAN Bus Titanium Gear Metal Brushless Servo
Feetech FU8830BL 7.4V 30kg 180 Degree CAN Bus Titanium Gear Metal Brushless Servo
Model: FU-8830-C001
Storage Temperature Range: -30℃~80℃
Operating Temperature Range: -20℃~60℃
Size: 40*20*39mm
Weight: 86.4±2g
Gear type: Titanium
Limit angle: NO
Bearing: Ball bearings
Horn gear spline: 25T/5.9mm
Gear Ratio: 1/241
Case: Aluminum
Connector wire: 30±1CM
Motor: Brushless Motor
Operating Voltage Range: 6-8.4V
Idle current (at stopped): 55mA@7.4V
No load speed: 0.083sec/60°(120RPM)@7.4V
Running current (at no load): 420mA@7.4V
Peak stall torque: 34.5kg.cm@7.4V
Rated torque: 11.5kg.cm@7.4V
Command signal: Pulse width modulation
Communication Protocol: UAVCAN
Control System Type: Digital comparator
Pulse width range: 500~2500 μsec
Stop position (Neutral position): 1500 μsec
Running degree (Operating angle): 180±5°(at 500→2500μsec)
Dead band width: ≤4 μsec
Rotating direction: Counterclockwise (at 1500→2000 μsec)
Waterproof performance: IP66

FU8830BL Servo x1
Related products
-
Feetech Servo
Feetech SCS15 High Torque 6V 15kg Servo Digital Robot Servo 10cm 3 Pin Cable For SCS Smart Control RC Servo
Rated 0 out of 5 -
Feetech Servo
Feetech STS3045M 6V 6kg 360-degree steering gear is equipped with a self-researched and self-developed TTL control board
Rated 0 out of 5




Reviews
There are no reviews yet.