Your Cart
Sign In 
> Product details
HEX Orange Cube+ Flight Controller Standard Set Ardupilot Pixhawk Cubepilot For Quadcopter Drones
| Part No.: | HX4-06222 |
| Manufacturer: | HEX |
Send to a friend
Features
The Cube Orange+ Standard Set features a high-performance H7 processor and the 1090MHz ADS-B receiver from uAvionix. The Cube Orange+ has upgraded IMUs and the STM32H757 MCU. The autopilot can be set up to automatically avoid aircraft that are detected in an exclusion zone set by the pilot. Previously known as Pixhawk 2.1.
Please note that:
At present, due to the relatively new chip,
PX4 firmware and old apm firmware are not supported temporarily.
Firmware above v4.2.3 of apm can be used.
Product Details
Sensors: Accelerometer, Gyroscope, Compass, Barometric Pressure Sensor
Power input voltage/rated input current: 4.1-5.7 V / 2.5 A
Power rated output/input power: 14 W
USB port input voltage/rated input current: 4-5.7 V / 250 mA
Servo rail input voltage: 3.3 V / 5 V
Not waterproof. External waterproof protection is needed
Operation Temperature: -10 °C / 55 °C
Cube Orange+ Housing Material: CNC Aluminum Alloy
ADSB Carrier Board Housing Material: ABS Molding
Power input voltage/rated input current: 4.1-5.7 V / 2.5 A
Power rated output/input power: 14 W
USB port input voltage/rated input current: 4-5.7 V / 250 mA
Servo rail input voltage: 3.3 V / 5 V
Not waterproof. External waterproof protection is needed
Operation Temperature: -10 °C / 55 °C
Cube Orange+ Housing Material: CNC Aluminum Alloy
ADSB Carrier Board Housing Material: ABS Molding
Item Packing
Orange Cube+ Flight Controller x 1
Detailed Images
Recommended products list
- CUAV 7-Nano Autopilot Open Source System for Multi-copter Fixed Wing Compatible with ArduPilot and PX4 Firmware-Standard version
- iFlight New BLITZ Mini F745 STM32F745 Flight Controller with Ardupilot Betaflight firmware for FPV Racing Freestyle Long Range
- iFlight New BLITZ F745 STM32F745 Flight Controller with Betaflight Ardupilot firmware for FPV Racing Freestyle Drone Accessories
- DIGITAL AIRSPEED SENSOR AS-DLVR-I2C DLVR-L10D for ArduPilot RC Multirotor Airplane VOTL UAV RC Model DIY Parts
- HEX Orange Cube+ Flight Controller Standard Set Ardupilot Pixhawk Cubepilot For Quadcopter Drones
- HEX Orange Cube+ Ardupilot Flight Control Main Control Module Pixhawk Cubepilot For Quadcopter Drones
- CUAV X7+ PRO Flight Controller Open Source Autopilot With NEO 3 GPS for PX4 ArduPilot FPV RC Drone Quadcopter
- CUAV X7+ Flight Controller NEO 3 GPS Pixhawk Open Source PX4 ArduPilot GNSS FPV RC Drone Quadcopter
- CUAV NEO 3 PRO GNSS U-BLOX M9N GPS Module For PIX Flight Controller Pixhawk with Ardupilot PX4 Open Source 4 Starts
- CUAV NEO 3 U-Blox M9N GPS Module for Pixhawk Compass Support Ardupilot PX4 Open Source UAV Navigation
- Holybro Ardupilot Arduplane Pitot Digital Air Speed Meter / Airspeed Meter Sensor Tube for Pixhawk PX4 Flight Controller
- MiniAPM V3.1 Mini ArduPilot Mega 2.6 External Compass APM Flight Controller for Multicopter FPV
