Control version > Product details
HUBOSD ECO X Type w/STOSD8 Current Sensor 5V 12V Dual BEC PDB with XT60 Plug
Part No.: | XP046 |
Manufacturer: | Feixiang |
Send to a friend
Features
It is a multifunctional HUB with PDB, BEC 5V/2A &12V/500mA, Current sensor 140A, STOSD8. It is specially made for the mini FPV Quad.
The BEC 12V is linear regulator, no LC Filter needed. Built-in STOSD8 can support Plug & Play, no complicated settings needed.
Product Details
Brand name: Realacc
Input voltage range (3S-5S operation): 8 - 21VDC
PDB: 4x30A (Max.4x35A)
Regulated 5V and 12V outputs
Current Sensor 140A
Built-in STOSD8
Physical:
- 2oz copper, 4-layers &1.6mm PCB.
- 1x Battery input, 4x ESC outputs. 2x BEC 5V outputs, 2x BEC 12V outputs.
- Camera signal & Gnd pads, Video Transmitter Signal & Gnd pads
- 1x Serial port (RX, TX, G)
- Dimensions: 51x36x4mm, Weight: 9g
- Mounting holes 30.5mm square spacing, Φ3mm
PDB (ESC outputs)
Continuous current: 30A per output
Peak current (10 seconds/minute): 35A per output
BEC 5V outputs
Designed for RC Receivers, Flight controllers, OSD, and Servos.
DC/DC synchronous buck regulator.
Voltage: 5.0 +/- 0.1VDC
Continuous current: 2 Amps (Max.2.5A 10s/minute)
Output Ripple: 40mV (VIn=16V, VOut=5V@2A load)
Short-circuit tolerant (5 seconds/minute)
BEC 12V outputs
Linear regulator, very low noise. LC Filter is needless.
Designed for Video TX or FPV camera.
Voltage: 12.0 +/- 0.3VDC (4~5S operation)
Continuous current: 500mA@16V IN, 400mA@20V IN
Short-circuit tolerant (2 seconds/minute)
If the battery is 3S LiPo, Output voltage=3S LiPo voltage - 1V
Current Sensor: 140A
If current >140A. STOSD display 140A
STOSD8
Running indicator
Blue LED blinks: STOSD is initializing
Blue LED light: STOSD is working.
Item Packing
Detailed Images
Recommended products list
- Matek System XCLASS FCHUB-12S PDB Board 5V & 12V Output w/ Current Sensor 3-12S Lipo for RC Drone
- MATEK CAN-G474 Board with 5Mbit/s CAN Transceiver and STM32G474 MCU AP_PERIPH CAN NODE for RC FPV Drone
- Matek MATEKSYS H7A3-SLIM STM32H7A3RIT6 Flight Controller Built-in ICM42688P 2~8S LiPo For RC FPV Long Rang Racing Drone
- MATEK Mateksys I2C-INA-BM ULTRA-PRECISE I2C POWER MONITOR for fpv drone fpv diy parts
- MATEK MATEKSYS PM20S-2 POWER MODULE With Two Independent Step-Down Voltage Regulators 9V-85V DC IN 4-20S Lipo for RC FPV Drone
- Mateksys R24-P6V ExpressLRS ELRS 2.4GHz 6CH PWM Vario Receiver Dual Antenna for RC Drone Airplane
- Mateksys F405-minite Flight Controller For Airplane Rc FPV Drone
- MATEK Mateksys RC Helicopter Flybarless Controller G474-HELI STM32G474 ICM42688P SPL06L 2x BEC Rotorflight Firmware
- New Matek Systems M10Q-5883 GNSS Ublox SAM-M10Q Magnetic Compass Module QMC5883L For RC FPV Racing Drone
- Matek MATEKSYS ELRS-R24-P6 R24-P6 EXPRESSLRS 2.4G 6CH PWM Receiver ExpressLRS 3.0 VBAT Voltage Sense for RC Airplane Fixed-Wing
- Matek F411-WTE FLIGHT CONTROLLER F411 WTE OSD 2~6S INAV Barometer For Racing Drone FLYWING Airplane
- Matek MATEKSYS F405-WTE F405 STM32F405RET6 Flight Controller Built-in OSD SD Slot DPS310 for RC Drone
- Matek H743-WLITE 2~6S Lipo Barometer DPS310 Flight Controller for RC Airplane Fixed-Wing FPV Drones
- MATEK M10-L4-3100 ArudPilots AP_PERIPH DroneCAN Protocol BAROMETER GNSS COMPASS GPS Module for RC Multirotor Airplane
- Matek Systems Micro BEC 6-30V To 5V / 9V-ADJ Step-down Regulator For FPV RC Racing Drone DIY Accessories
- Matek Systems MICRO BEC 6-30V TO 5V/9V-ADJ Step-down Regulator for RC FPV Racing Drone
- MATEKSYS Matek OPTICAL FLOW & LIDAR SENSOR 3901-L0X for RC FPV Racing Drone
- Matek System MICRO BEC 6-60V TO 5V/9V/12V-ADJ
- Matek 2812 LED Controller 2812ARM for RC
- Matek 2812ARM Light-6 LED Board Distribution board for FPV LED Drone ARM Light
- Matek FCHUB-W PDB 3-6S Built-in 4 BEC & 104A Current Sensor for RC FPV Racing Drone Models Multicopter DIY Accessories
- Matek Systems F4 F405 Mini Flight Controller Integrated OSD 32K Gyro 32M Flash 20x20mm
- 4 PCS Matek M3*7+4.5 Flight Controller Anti-Vibration Fixed Screws for FPV Racer
- Matek Lost Model Beeper Flight Controller 5V Loud Buzzer Built-in MCU for FPV Multicopters
- Matek Tail Light WS2812B & Loud Buzzer Dual Modes
- Matek WS2812B LED Board With 5V Buzzer For Naze 32 Skyline 32 Flight Controller