Categories

Payment

  • Ebay

Shipment

  • Hongkong post
  • EMS
  • FEDEX

> Product details

CUAV V5+ Autopilot Flight Controller with NEO 3 GPS for FPV Drone Quadcopter Helicopter Pixhawk

CUAV V5+ Autopilot Flight Controller with NEO 3 GPS for FPV Drone Quadcopter Helicopter Pixhawk
Part No.: NEO3-V5+
Manufacturer: CUAV
Quantity:out of stock

Send to a friend

Your name:
Your e-mail:
Recipient's email:

Features

V5+ AutoPilot® is an advanced autopilot designed and made in CUAV® . The board is based on the FMUv5open hardware design, the external interface uses the Dronecode standard pinouts, and the modular design allows the user to design its backplane. It is fully compatible with PX4 and ArduPilot firmware. Mainly used for academic and business development.

Product Details

V5+ Flight Controller
* Quick Summary
Main FMU Processor: STM32F765
32 Bit Arm® Cortex®-M7, 216MHz, 2MB memory, 512KB RAM
IO Processor: STM32F100
32 Bit Arm® Cortex®-M3, 24MHz, 8KB SRAM
* On-board sensors
Accelerometer/Gyroscope: ICM-20689
Accelerometer/Gyroscope: BMI055
Magnetometer: IST8310
Barometer: MS5611
* Interfaces
8-14 PWM outputs (6 from IO, 8 from FMU)
3 dedicated PWM/Capture inputs on FMU
Dedicated R/C input for CPPM
Dedicated R/C input for PPM and S.Bus
analog / PWM RSSI input
S.Bus servo output
5 general purpose serial ports
4 I2C ports
4 SPI buses
2 CANBuses with serial ESC
Analog inputs for voltage / current of 2 batteries
* Power System
Power: 4.3~5.4V
USB Input: 4.75~5.25V
Servo Rail Input: 0~36V
* Weight and Dimensions
Weight: 90g
Dimensions: 85.5*42*33mm
* Other Characteristics
Operating temperature: -20 ~ 80°c(Measured value)

NEO 3 GPS
Compass:IST8310
GNSS receiver:UBLOX NEO M9N
RGB drive:NC5623C
Buzzer:Passive buzzer
Safety switch:Physical button
GNSS:Beidou、Galileo、GLONASS、GPS
GNSS Augmentation System
-SBAS:WAAS,EGNOS,MSAS
-QZSS:L1s(SAIF)
-Other:RTCM3.3
Number of concurrent GNSS:4
Frequency band
-GPS:L1C/A
-GLONASS:L10F
-Beidou:B1I
-Galileo:E1B/C
Horizontal accuracy:2.0M
Speed accuracy:0.05M/S
Nav. update rate:25Hz(Max)
Acquisition
-Cold start:24S
-Hot start:2S
-Aided start: 2s
Number of satellites(MAX):32+
Sensitivity
-Tracking and nav-167dBm
-Cold start Hot star-148dBm
-Reacquisition -160dBm
Protocol:UART+IO+I2C
Port TYpe:GHR-10V-S
Supported flight controller:CUAV series,Pixahwk series
Wave filtering:SAW+LNA+SAW
Anti-Electromagnetic/radio frequency interference:EMI+RFI
Upgrade firmware:support
Support Flight control type:Ardupilot/PX4*(PX4 is still working hard to adapt to the clock)
Input voltage:5V
Operating temperature:-10~70℃
Size:60*60*16MM
Weight:33g

Item Packing

V5+ Flight Controller x 1
NEO 3 GPS x 1

Detailed Images







Recommended products list