Payment

Shipment

Your Cart

Your cart is empty

Manufacturer


日本語
한국어
Español
Français
Русский
繁體中文

If your order ship by Hong Kong Air Mail, You can check it on

If your order ship by EMS, You can check it on

iCharger X8 1100W 30A DC LCD Screen Smart Battery Balance Charger Discharger

Part No.:	ICHARGEX8
Manufacturer:	Feixiang

Send to a friend

Features

1.X8 uses advanced Synchronous buck-boost DC/DC converter technology with high power, high current and high-performance power conversion circuit. The maximum charge power capacity is up to 1100W, the maximum charge/discharge current of a channel is up to 30A.
2.X8 Supports 8s LiPo, Lilo, LiFe, LiHV, LTO and NiZn batteries, with maximum 2A balance current, and adopts a unique balance calculation of internal resistance correction. Supports 1-25s NiMH/NiCd batteries and 1-15s Pb batteries.
3.With digital-power mode for great (over-current , over-voltage , input under-voltage , input undercurrent , and etc.)
4.Intelligent fan control. Sensing internal temperature via the internal temperature sensor, to thereby control the fan speed.
5.Internal temperature . When the internal temperature exceeds the Power Reduce temperature, the output power is automatically reduced; and the charger will shut down when temperature exceeds the Shut-down temperature.
6.This charger can save 32 parameters sets and support the data import/export to
7.A 2.4" IPS LCD screen provides rich information including current, voltage, power, capacity, internal resistance, control status, time-consuming and temperature, etc.
8.Multi-discharge features: self-discharge, regenerative to input discharge, and lithium battery extra expanding discharge.
9.Supports measurement for internal resistance of battery offline and online. Can measure not only the internal resistance of the entire battery pack, but also measure the internal resistance of each cell within the lithium battery.
10X8 has for reversed polarity (input or output), input voltage/current, battery temperature, charging capacity, overrun time and maximum power etc.
11.Supports upgrading the hardware program by USB port or X8 also supports the “Junsi Console” software and can display, plot and analyze the charge and discharge data by it.

Product Details

Display: 2.4 " IPS LCD (320×240)
Net weight: 200g
Dimension: 97.5×64.5×37mm
Input voltage range: 9 49VDC
Maximum input current limit: <35A
Maximum charge/discharge current: 30A
Maximum charge power capacity: 1100W
Maximum discharge power capacity: 50W
Maximum regenerative discharge power capacity: 1100W
Maximum extra discharge power capacity: 1000W 33.5V/30A
Maximum current drain for balancing: >2.0A

Item Packing

iCharger X8 1100W 30A DC LCD Screen Smart Battery Balance Charger Discharger x 1