Categories

Payment

  • Ebay

Shipment

  • Hongkong post
  • EMS
  • FEDEX

Pixhawk Control Version > Product details

Matek MATEKSYS H7A3-SLIM STM32H7A3RIT6 Flight Controller Built-in ICM42688P 2~8S LiPo For RC FPV Long Rang Racing Drone

Matek MATEKSYS H7A3-SLIM STM32H7A3RIT6 Flight Controller Built-in ICM42688P 2~8S LiPo For RC FPV Long Rang Racing Drone
Part No.: MA-H7A3-SLIM
Manufacturer: Matek

Send to a friend

Your name:
Your e-mail:
Recipient's email:

Features

Matek MATEKSYS H7A3-SLIM STM32H7A3RIT6 Flight Controller Built-in ICM42688P 2~8S LiPo For RC FPV Long Rang Racing Drone

Product Details

Specifications:
MCU: STM32H7A3RIT6, with a 280MHz Cortex-M7, 1.4MB RAM, and 2MB Flash.
IMU: ICM42688P.
Baro: SPL06-001.
OSD: AT7456E.
Blackbox: 128MB Flash (1G-bit NAND).
6x Uarts (1, 2, 3, 4, 5, 6), featuring built-in inversion.
11x PWM outputs.
1x I2C.
1x CAN.
4x ADC (VBAT, Current, VB2, Cur2).
3x LEDs for FC STATUS (Blue, Red) and a 3.3V indicator (Red).
USB Type-C (USB2.0).
8x PWM outputs on 2x JST-SH1.0_8pin connectors for 2x 4in1 ESC.
1x JST-GH1.25_4pin connector (5V/CAN-H/CAN-L/G).
9V output, switchable ON/OFF.
Digital video OSD is supported by any spare UART.

Power:
Vbat Input: 6 - 36V (2 - 8S LiPo).
BEC: 5V 2A continuous (Max. 3A).
BEC: 9V 2A continuous (Max. 3A).
LDO 3.3V: Max. 200mA.
No Current Sensor is built-in.
ADC VB2 pad supports a maximum of 69V (voltage divider: 1K:20K).

FC Firmware:
Flashing is done with STM32CubeProgrammer.
Physical:
Mounting: 30.5 x 30.5mm, Φ4mm with Grommets Φ3mm.
Dimensions: 36 x 36 x 5 mm.
Weight: 7g.

Item Packing

1x H7A3-SLIM
6x Silicon grommets from M4 to M3
2x JST-SH1.0_8pin cables, 5cm long, with 8pin connectors
1x JST-GH-4P to JST-GH-4P cable for the CAN port, 20cm long

Detailed Images






Recommended products list