Payment

Shipment

Your Cart

Your cart is empty

Manufacturer


日本語
한국어
Español
Français
Русский
繁體中文

If your order ship by Hong Kong Air Mail, You can check it on

If your order ship by EMS, You can check it on

> Product details

Hitec HSR-5980SG Digital Robot Servo

Part No.:	SO-HSR-5980SG
Manufacturer:	HITEC

Send to a friend

Features

It takes quite a servo to impress us at ServoCity but the HSR-5980SG does just that. This servo raises the bar when it comes to servo technology. The performance is staggering for a servo this size especially when installed in our ServoPower Gearbox (over 2,000 oz-in. or torque). Right out of the box, this servo operates a full 140° (full trims). A full set of steel gears offers 30 times the strength of nylon gears. Each gearset shaft rides in bronze bushings for durability and strength. We offer the HSR-5980SG servo in two configurations, continuous rotation (potentiometer is left outside the servo case) and reverse rotation. We know that this is not a cheap servo but you definitely get what you pay for - you will be impressed!

Product Details

Control System: +Pulse Width Control 1500usec Neutral
Required Pulse: 3.3-7.4 Volt Peak to Peak Square Wave
Operating Voltage Range: 4.8-7.4 Volts
Operating Temperature Range: -20 to +60 Degree C (-68F to +140F)
Operating Speed (6.0V): 0.15 sec/60° at no load
Operating Speed (7.4V): 0.12sec/60° at no load
Stall Torque (6.0V): 333.29 oz-in. (24kg.cm)
Stall Torque (7.4V): 416.61 oz-in. (30kg.cm)
Standing Torque (6.0V): 433.27 oz-in. (31.2kg.cm) 5 degree deflection
Standing Torque (7.4V): 541.59 oz-in. (39kg.cm) 5 degree deflection
Operating Angle: 60 Deg. one side pulse traveling 450usec
360 Modifiable: Yes
Direction: Clockwise/Pulse Traveling 1450 to 1950usec
Idle Current Drain (6.0V): 3mA at stop
Idle Current Drain (7.4V): 3mA at stop
Current Drain (6.0V): 300mA/idle and 4.2 amps at lock/stall
Current Drain (7.4V): 380mA/idle and 5.2 amps at lock/stall
Dead Band Width: 2usec
Motor Type: Coreless Metal Brush
Potentiometer Drive: 6 Slider Indirect Drive
Bearing Type: Dual Ball Bearing MR106
Gear Type: 4 Hardened Steel Gears
Connector Wire Length: 11.81" (300mm)
Dimensions: 1.57" x 0.78"x 1.45" (40 x 20 x 37mm)
Weight: 2.18oz (62g)

Item Packing

- Hitec HSR-5980SG Digital Robot Servo x 1